Neu Bauteile Zum Verkauf Von Holst Truck Parts - Ucon, Idaho

NEW 13K FABRICATED STEERABLE LIFT AXLE. 10 HOLE HUB PILOT. ADJUSTABLE RIDE HEIGHT, ADJUSTABLE FRAME WIDTH COMPACT DESIGN. WITH STAINLESS FENDER KIT ROUGH AXLE WEIGHT 920LBS WHEEL PLEASE CALL FO...Weitere Details

NEW 13K FABRICATED STEERABLE LIFT AXLE. 10 HOLE HUB PILOT. ADJUSTABLE RIDE HEIGHT, ADJUSTABLE FRAME WIDTH AVAILABLE PRE-PLUMBED WITH AIR TANK AND AIR HOSES FOR FASTER INSTALLATION SEE DOCUMENTS FOR...Weitere Details

50 Gallon Side Mount Steel Reservoir tank. Product is built of tough 13 Ga steel and is designed to install on the side of your truck. ****INCLUDES BRACKETS**** The reservoir is fully baffled to c...Weitere Details

AC2000 LIFT AXLE CONTROL BOX/PUSHER AXLE CONTROL BOX ALL ENCLOSED WITH REGULATOR AND PRESSURE GUAGE WIRE HARNESS FOR REVERSE LIGHT. AIR UP/AIR DOWN ONLY

NEW DIRECT DRIVE NON VALVE HYDRAULIC PUMP. BI-ROTATIONAL 7/8 13 SPLINE INPUT SHAFT 2500 PSI-27 GPM @ 1000 RPM. 1 1/2 SIDE AND 1 1/2 REAR NPT PORTS. 2 1/2 GEAR SIZE. Length: 0.3048 Width: 0.4572...Weitere Details

NEW DIRECT DRIVE NON VALVE HYDRAULIC PUMP. BI-ROTATIONAL NPT 2 1/2'” gear Parker 5151 7/8 13 Tooth Spline Shaft 4 Bolt Flange, Doweled Construction, Extended Studs 24-Gal Min 1000 RPM to 55 GPM ...Weitere Details

NEW LIFT AXLE FENDER MOUNTING KIT. FITS UF1013 SILENT DRIVE AND OTHERS. DOES ONE AXLE. *KIT DOES NOT INCLUDE FENDERS*

NEW DIRECT MOUNT NON VALVE BI ROTATIONAL PUMP. 13 SPLINE SAE "B" INPUT. Flow Rate at 1200 RPMS 15.588 gpm Flow Rate at 1500 RPMS 19.485 gpm Flow Rate at 900 RPMS 11.691 gpm MAS PSI 3000 Gear ...Weitere Details

NEW DIRECT DRIVE NON VALVE HYDRAULIC PUMP. 13 Spline SAE “B” 2/4 Bolt SAE “B” REPLACEMENT FOR PARKER DESIGN Cast Iron, Heavy Duty Bearings Precision Machined Gears Bi-Rotational Operation...Weitere Details

NEW DRIVE NON VALVE HYDRAULIC PUMP. Flow Rate: 27 @ 1,000 RPM (U.S. Gallons Per Minute) Input Shaft Diameter: 1.25 (Inch) Input Spline Quantity: Round Keyed Maximum RPM: 3,000 (Revolutions Per Mi...Weitere Details

NEW AIR PINTLE HITCH 45 TON RATING. P45AC4K INCLUDES HITCH, AIR CAN AND MISC HARDWARE.

8" Drop / Rise Shank Sizes: 2” Combo Ball Size: 2” x 2-5/16” Meets V5 and SAE J684 certifications. Made in the USA Covered under 1 year warranty Provide 24/7 security with our Locking Pins

4" Drop / Rise Shank Sizes: 2” Combo Ball Size: 2” x 2-5/16” Meets V5 and SAE J684 certifications. Made in the USA Covered under 1 year warranty Provide 24/7 security with our Locking Pins

NEW SILENT DRIVE COIL SPRING SHOCK KIT

NEW 45 TON NON AIR PINTLE HITCH.

MANUAL LIFT AXLE CONTROL, TOGGLE STYLE SWITCH WITH PRESSURE REGULATOR AND PRESSURE GAUGE.

K1010 Series 4-Way, 3-Position Feathering Air Valve Kit Kit contains a spring-return, neutral lockout, feathering air valve. Push lock fittings included. Includes durable, DOT approved,...Weitere Details

S-E211 OR AVC-295-8 PTO COMBO CONTROL KIT Safety push latch prevents accidental PTO engagement Bright led indicator light Automatic disengagement of PTO in “Lower” position A â€...Weitere Details

HRV10025 HYDRAULIC INLINE RELIEF VALVE, 1"NPT FITTING SIZE. 3000PSI RATING. Length: 0.3048 Width: 0.1016 Height: 0.1016

NEW SELECTOR FLOW VALVE. 30GPM, 1" NPTF. MANUALLY OPERATED. 3000 PSI MAX. CONVERT TO AIR SHIFT USING HSV1C VALVE. DIVERTER VALVE Length: 0.2032 Width: 0.2032 Height: 0.2032

BASK16P AIR SHIFT CYLINDER TO COVERT FROM CABLE TO AIR. Length: 0.1016 Width: 0.1016 Height: 0.1016

NEW SELECTOR FLOW VALVE. 20GPM, 3/4" NPTF. MANUALLY OPERATED. 3000PSI MAX. **CONVERT TO AIR SHIFT BY ADDING HSV1C VALVE**

NEW POLY LIFT AXLE FENDER. PRICE EACH

PTO CONVERSION KIT. COMES WITH DRIVE FLANGE, MAINS SHAFT, MOUNTING BOLTS, GASKET AND SEAL. FITS MANY 489 & 825 SERIES PTO'S. REPLACES CHELSEA 32851-16X

HYDRAULIC LINE BUTTERFLY COUPLER 1.25" NPT COMES COMPLETE WITH MAUL AND FEMALE END. FLOW RATE 75GPM. Length: 0.1524 Width: 0.1524 Height: 0.1524