Descripción
The Flow M2C-2030 DWT Waterjet Cutting System, featuring a 30HP Hyplex Prime pump, is designed for precision cutting with an operating pressure range of 55–60 ksi (379–414 MPa). Manufactured by Flow, this unit includes a serial number 5448-1 and was used with an enclosure assembly (049886-3) rated at 37A, 460V/60Hz/3PH, with a 5kA S.C. amp rating and Type 4 enclosure. It is currently in used condition and includes a parts list and detailed installation requirements. Ideal for industrial cutting applications requiring high-pressure waterjet technology.
Specifications:
Machine Type: Waterjet Cutting System
Pump Model: 30HP Hyplex Prime
Manufacturer: Flow
Model Number: M2C-2030 DWT
Serial Number: 5448-1
Operating Pressure: 55–60 ksi (379–414 MPa)
Enclosure Assembly: 049886-3
Full Load Amps: 37A
Voltage/Frequency/Phase: 460V / 60Hz / 3PH
Electrical Diagram: 049973-DWG
S.C. Amp Rating: 5kA
Enclosure Type: Type 4
Condition: Used
Location: Taiwan
Parts List:
Crankcase: Direct Drive Bearing Set (Includes bearing housing, coupling, bearing pad ×2, 10-grade bolts): 3 Sets
Crankcase: Low Pressure Bearing Base (Includes bearing base and two types of oil seals): 3 Sets
Basic Maintenance Kit (Mid-term Maintenance): 1 KIT
Second Generation Bearing Housing Assembly: 3 PCs
Second Generation Seal Seat: 3 PCs
Check Valve Body: 3 PCs
High Pressure Zirconia Ceramic Sleeve: 3 PCs
Installation Requirements:
Floor: Steel-reinforced concrete, ≥15 cm thick, compressive strength ≥210 kg/cm², leveling within 12 mm, smooth with no cracks
Power: Main: 3-phase 220V/480V, 100A circuit breaker; Control: Single-phase 220V, 10A circuit breaker
Air: Compressor: 6–7 kg/cm², 60 CFM, 15 HP
Water: Pressure ≥60 psi (4 kg/cm²), inlet 3/4” (19 mm), flow 12–21 L/min, filtered (RO recommended), PVC piping
Drainage: Pressure ≥60 psi (4 kg/cm²), outlet 1”, slope 1:20–1:26, 3/4” PVC piping
Exhaust: Pipe size ≥1/2”, discharge to external exhaust
Gas: Nitrogen for special processes, clean/dry compressed air for cylinder actuation/vacuum valves
Applications:
Precision cutting of various materials
Industrial manufacturing and fabrication
Automotive and aerospace component processingEspecificaciones
CategoríasMáquinas Industriales Tienda / Almacén
FabricanteFLOW
ModeloM2C-2030 DWT
Número de serie5448-1
CondiciónUsado
Número de inventarioGBTW100015
CategoríasMáquinas Industriales Tienda / Almacén|
FabricanteFLOW|
ModeloM2C-2030 DWT|
Número de serie5448-1|
CondiciónUsado|
Número de inventarioGBTW100015|
